Data is sampled at 1Hz from the connected sensor. Each data record is date and time-stamped when it is stored. A new file (.CSV) is generated for each day’s worth of data.
Raw wind & weather data is processed by the logger to calculate 10 minute averaged values with min and max readings during that period. This data set is recorded every 10 minutes in a separate daily .CSV file.
A Wi-Fi wireless local area network (WLAN) is required for remote access to the data stored on the logger. If this is temporarily unavailable, data may be downloaded directly from the SD card to a PC if it is removed from the SpaceLogger.

The SpaceLogger Real-time Communicator Software may connect to multiple loggers within the same WLAN at any time.
The SpaceLogger.W8.Wireless logger requires RS232 input; this may be direct from the sensor or via a WS-15A Display Unit for local display of live weather data. When long cable runs dictate use of RS485, a WS-15A Display or RS485 to RS232 converter enables connection to the logger. Configuration of the SpaceLogger for the WLAN is via a simple set-up file written to the SD card.

• Recording of wind speed, wind direction and weather data
• Wireless data download to PC
• Real-time clock for date and time-stamping of data with battery backup
• WindSonic sensor compatible
• MetPak Weather Station compatible
• SD Card for data storage Raw data logged to .CSV file
• Ten minute averaged data logged to .CSV file
• Compact, economical and robust design
  

Includes:

• R-P-R SpaceLogger W 8. Wireless Data logger
  

Specifications:

• Physical:Dimensions:Width: 67 mm; Depth: 92 mm; Height: 28 mm (excluding optional rubber feet); Weight:100g; Enclosure material: GP ABS (UL94-HB) plastic and acrylic
• RS232 Input:Sensor type: Gill Instruments’ WindSonic, WindObserver II and WindMaster ultrasonic wind speed and direction sensors.MetPak, MetPak RG and MetPak Pro weather stations.; Transmission standard: RS232, 8 bits and no parity; Sensor output format: Continuous mode: ASCII UV (or UVW), Polar or Tunnel from all sensors; Transmission speed: 9600 Baud; Connection: 9-way D-type connector, male.
• Wireless Connectivity: Wireless module: Wi-Fi Certified 2.4GHz IEEE 802.11b/g 802.11i Security WPA2-PSK, WPA, WEP;
  Aerial:Circuit board mounted.
• Data Storage: Data Storage Card;Removable: SD or SDHC card; Data Capacity: 4GB (standard) or as per memory card capacity; File System: FAT16 or FAT32 with 8.3 file names. Sector size 512 Bytes; Data logging interval: 1Hz.
• Audible / Visual Indicators: LED Indicators; SD card status: Green: Ready to record data | Red: Writing data to SD card
  Wireless Connectivity Status: Green: Connected to wireless network; Audible Bleeper: Status alert
• Real Time Clock: Accuracy: ±40 ppm at 25 ºC; Backup battery: CR2032
• Power: Power requirement: 5 Vdc ±10%;  Current; at 5Vdc 200 mA typical; Connection:Micro USB connector
• Environmental: Temperature Range: Operating: -25 ºC to +70 ºC; Storage: -40 ºC to +70 ºC; EMC: CE marked - EMC: directive 2004/108/EC[Emissions: EN 61326-1:2006 | EN 301 489-1 | EN 55022:2010 | EN 55022:2006
  Immunity: EN 61326-1:2006 | EN 61000-4-2:2009 | EN 61000-4-3:2006] FCC/CFR 47: Part 15:2004