The complexity of underground utility networks are continually increasing. So obtaining precise information on the  location of buried utilities has never been more important. The protection of buried assets during excavation workdemands accurate mapping and surveying of existing utilities.
The Leica ULTRA provides our most advanced precision utility tracing system. Intelligent signal processing has been integrated with unique flexible operating modes, to help save you time and increased confidence in your results. Selectable antenna and customised frequencies optimises your instrument for site specific applications, supported by our AIM system which monitors signal interference levels, recommending which mode to use for the best results.

Ambient Interference Measurement(AIM), When working in congested environments, external interferences can affect the  effectiveness of utility tracing. To guard  against interference, the Leica ULTRAincorporates advanced Ambient Interference Measurement (AIM), which analyses the surrounding area for noise and recommends the best frequencies for accurate utility tracing.

Offset measuring, There will always be an occasion when the  utility runs close to, or underneath an obstruction. With Offset Measuring, the Leica ULTRA can locate the target line ifnot directly accessible from above. The  function uses the available data to  estimate the horizontal and vertical  (depth) distance.

Transmitter to receiver link, Advanced communication link between  the Leica ULTRA receiver and transmitter, enables you to control the transmitter directly from the receiver. Work smarter and at greater distances to help achieve best practice whilst reducing time spent  walking to the transmitter.

What's in the Box:

• (1) Leica ULTRA Locator – Standard
  
• (2) D-cell alkaline batteries
• (1) User manual
  

Features:

• LARGE CLEAR DISPLAY, Large backlit high visibility LCD screen Clear display provides clear, improved and confident location and utility tracing
• CUSTOM FREQUENCIES, Configure for site specific applications User configurable modes from 50 Hz to 200 kHz Choose from 100 pre-selected frequencies or customise your own frequencies
• COMPASS, Shows the user the direction of the utility they are locating / tracing
• BLUETOOTH®, Enable wireless communications with software running on a laptop, survey field PC or other GPS enabled device
• INCREASED TRANSMITTER POWER OUTPUT, Choose between 5W and 12W transmitter power  outputs for superior tracing performance
• BUILT FOR THE MOST DEMANDING ENVIRONMENTS, IP65 protection  Fulfils toughest standards - shock resistant, protected  against water and dust ingress
• SELECTABLE ANTENNA CONFIGURATION, Configure antenna to best optimise for your job site. Select between more range, sharper response, noise  cancelling or easier sweeping.
• DIRECTION ENABLED, Identifying your target utility amongst multiple parallel  utilities Apply a special direction enabled signal from the
  transmitter, the receiver will display an arrow on the compass heading to guide you along the designated utility path
  

Specifications:

• Internal battery: Type: 2 D-cell alkaline. Typical operating time: 60 h intermittent use. 30 h continuous use at 21°C / 70°F; Battery saver: Unit shuts off after 5, 10, 20, or 30 min inactivity according to user setting, if selected
• Bluetooth(when fitted): Frequency bandwidth: 2402 - 2802 MHz; Output power: 100 mW; Antenna: Integrated antenna
• Environmental:Temperature Operating: -20°C to +50°C (-4°F to +122°F)
• Protection: Against water projected in jets from any direction, IP65 (IEC 60529) Dust tight
• Humidity: 95% RH non condensing. The effects of condensation are to be effectively counteracted by periodically drying out the product.
• Antenna configurations: Single peak,; Twin peak;  null; Left/right, cable only
• Audio output Speaker
• LCD backlight: LED
• External ports:  Mini-USB
• Operating modes and frequencies: Active cable, standard: Up to 100 frequencies; Passive cable, standard:  60 Hz, 120 Hz, 180 Hz, 50 Hz, 100 Hz,150 Hz; Sonde, optional, locate/depth only:  Any frequency
• Locating ranges: Cables: 4.6 m / 15’; Sondes:  3.0 m / 10’
• Depth estimate tolerances: Passive cable  ±10%: 0.15-3 m / 0.5-10’; Active cable ±5%:  0.2-3 m / 0.2-10’; Sonde ±5%:  0.15-3 m / 0.5-10’
• Weight: Instrument: 2.2 kg / 4.8 lbs
• Compatibility:  Transmitter must be running firmware v2.0 or higher  Locator must be running firmware v6.0 or higher