The Solinst Model 102 P4 Probe Water Level Meter is designed to measure groundwater levels in small diameter tubes and piezometers. A choice of two small diameter probe designs are attached to a narrow coaxial cable. The cable has a heavy-duty polyethylene jacket and stainless steel coaxial conductors for durability and strength. Permanent markings are precisely laser etched on the cable every 1/100 ft. or each millimeter.

A standard 9 volt battery, housed in an easy-access battery drawer, powers the Water Level Meter. When the probe enters water, a light and clearly audible buzzer are activated. The water level is then determined by taking a reading directly from the cable at the top of the well casing or borehole. A sensitivity control allows the buzzer to be turned off while in cascading water and ensures a clear signal in both high and low conductivity conditions.

Features

• Accurate, precise laser markings

• Narrow 4mm x 38mm probe weighing 0.35 oz (10g)

• Ideal for accessing narrow diameters

What's in the Box:

• (1) Model 102 P4 Probe Water Level Meter

• (1) Tape Guide

Brochure/Datasheet

Instruction manual

Catatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu