3.5 lb. Jersey pattern single bit axe with phantom bevels and a 36″ curved handle. This shape features lugs or ears that increase the surface contact area with the handle. A full-sized felling axe for general axe chores. Phantom bevels or hallows are designed to reduce sticking and burst wood chips.
Features:
- Forged tool steel head. Made in USA. - Hand sharpened, tapered bit for cutting and splitting. - ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council
Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4 inches from
the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition.
- Natural steel finish on head and cutting edge coated in clear lacquer to deter rust. - 36″ curved American hickory handle. Eye section is dried to below 10% moisture content to minimize
shrinkage and help prevent loosening. - Axe head is hydraulically seated onto handle and secured with a serrated aluminum wedge. The
serrated shape improves bite and the aluminum choice of material is strong, lightweight and does not
change size with moisture content. - The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2″
of the overall length of the handle is removed during assembly.
What's In The Box:
- (1) Council Tool 35JC36C Jersey Single Bit Axe
Brochure/Datasheet Instruction manualCatatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu
