3.5# Dayton pattern single bit axe with 20″ straight handle. Known as a miner’s axe, the short handle is used for close quarters work. Cutting edge is approximately 4.75″ of overall length and the poll is square.
Features:
- Forged steel head. Made in USA. - Hand sharpened, tapered bit for cutting and splitting. - ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge.
Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4 inches
from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition. - Body coated with red enamel and the cutting edges in clear lacquer to deter rust. - 20″ straight American hickory handle. Eye section is dried to below 10% moisture content to minimize
shrinkage and help prevent loosening. - Axe head is hydraulically seated onto handle and secured with a serrated aluminum wedge. The
serrated shape improves bite and the aluminum choice of material is strong, lightweight and
does not change size with moisture content.
- The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2″
of the overall length of the handle is removed during assembly.
What's In The Box:
- (1) Council Tool 35MD20 Miner’s Axe
Brochure/Datasheet Instruction manualCatatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu
